Bep Edu World

Specification Part - 2

Mx12 cmx12 cm (8.3"x4.8"x4.8"). contact probe ( TA-35 ). Accessories Operation manual 1 PC. Sampling Time Approx. 1 second. Included Reflective tape 1 PC Calibration Crystal time base and microprocessor Optional Contact Tachometer probe ( TA-35 ) circuit, no external calibration process Accessories ACV 110V, 220/230V to DC 9V adapter required.

Electrical Specifications Of Stroboscope

Stroboscopic 100 to 99,999 flashes per minute (FPM).
Resolution 0.1 FPM/RPM (less than 1,000 FPM/RPM)
Flash Rate Low range : 100 to 1,000 RPM/FPM. 1 FPM/RPM ( > 1,000 FPM/RPM ).
High range : 1000 to 99,999 RPM/FPM.
External Input signal : 5V to 30 V rms
Accuracy ± ( 0.05% + 1 digit ).
Trigger 100 to 99,999 RPM/FPM.
Light Source Long life high intensity LED array.
Input

Electrical Specifications Of Laser Photo Tachometer

Range 10 to 99,999 RPM
Accuracy ± ( 0.05% + 1 digit )
Photo 50 - 1,500 mm typically
Sampling Time 1 sec. ( 60 RPM )
Tachometer * Spec. of detecting distance are that Resolution 0.1 RPM < 1,000 RPM detecting under the size of reflecting tape is 10 1 RPM 1,000 RPM distance mm square & the measuring RPM Time base Quartz crystal value is 1,800 PPM.
The max. & min. Laser light * Less than 1 mW.detecting distance may change under source * Class 2 laser diode. Red. Wave length different environment, different is 645 nm approximately reflecting tape or the measuring RPM beyond 1800 PRM.

Electrical Specifications Of Contact Tachometer (Optional Probe, TA-35 )

Range Contact Tachometer :Resolution 0.1 RPM < 1,000 RPM 0.5 to 19,999 RPM 1 RPM 1,000 RPM Surface Speed ( m/min. ) : 0.01 m/min. 100 m/min. 0.05 to 1,999.9 m/min. 0.1 m/min. > 100 m/min
Surface Speed ( ft/min. ) : 0.1 ft/min. < 1000 ft/min.0.2 to 6,560 ft/min. 1 ft/min. 1,000 ft/min
Accuracy ± ( 0.05% + 1 digit )
Accessories RPM adapter ( Cone type )
1 PC. Sampling Time 1 sec. ( 6 RPM ).
Included RPM adapter ( Funnel type )1 PC
Surface speed test wheel 1 PC.

Features :

• Stroboscope use high intensity LED array.
• LCD display with back light.
• Stroboscope range : 10 to 99,999 RPM.
• External trigger for stroboscope. * Photo tach. range : 10 to 99,999 RPM.
• Photo tachometer use the laser light beam.
• Power supply : 1.5 V ( UM-1 ) x 4 PCs
• DCV power supply via external AC/DC adapter is available, AC/DC adapter is optional.

COMBINATION STROBOSCOPE Model : BP-2299 FEATURES:

• Combination Stroboscope with 3 functions :
• Battery power Stroboscope, use high intensity LED Digital Stroboscope, Laser Photo Tachometer, array, long life.Contact Tachometer ( optional probe ), 3 in 1 ,
• Back light high visible LCD display gives exact reading intelligent function. with no guessing or error and saves battery energy.
• Stroboscope, wide measuring range up to 99,999 RPM.
• High precision both for Stroboscope and Tachometer
• The Digital Stroboscope is used the microprocessor measurement.circuit design, high accuracy, digital readout, light duty,
• Use an exclusive one chip MICRO-PROCESSOR that is ideal for inspecting and measuring the speed of LSI-circuit and crystal time base to offer high moving gears, fans, centrifuges, pumps, motors and accuracy measurement & fast measuring time.other equipment used in general industrial
• Stroboscope build in external trigger input.maintenance, production, quality control, laboratories
• Long distance Laser Photo Tachometer build in.and as well as for schools and colleges for
• Optional Contact Tachometer probe is available.demonstrating strobe action.
• Compact and heavy duty housing case.GENERAL SPECIFICATIONS Display 5 digits ( 0 to 99999 ) LCD display. Operating 0 to 50 ( 32 to 122 ) Circuit Exclusive one-chip design microprocessor Temperature LSI circuit. Humidity Less than 80% R.H. Measurement Stroboscope Power Supply DC 1.5 V, UM-1 (D type) battery x 4 PCs Unit : FPM ( rotation per minute).
• DC 9V adapter input is built, AC/DC build in external trigger input. adapter is optional, not in included. Laser Photo Tachometer Power Stroboscope (3600 FPM) :Unit : RPM ( rotation per minute ). Consumption DC 160 mA.Contact Tachometer Laser photo Tachometer ( 3600 RPM ) :Unit : RPM ( rotation per minute ). DC 130 mA. Surface speed ( ft/min., m/min ) Weight 800 g ( 1.76 LB ).
• It should cooperate with optional Dimensions 21.

Leverage on our technical expertise, we offer our clients a gamut of Digital Stroboscope Meter of superior quality. This is manufactured under the guidance of our skilled team of technocrats, in compliance with international quality standards. In order to ensure quality and smooth operation at users’ end, this product is stringently tested on different predefined parameters. This product is available in various sizes, designs and models for our esteemed clients.

Features:

• Stroboscope Used Exclusive One Chip Micro Computer LSI circuit
• Crystal Time Base to Offer the High Accuracy Measurement & last Measuring Time
• Wide Measuring Range & High Resolution
• Digital Display Gives Exact reading with no Guessing or errors
• Multi Functional One Stroboscope combines low high Measuring Range
• The use of Durable long lasting components, Including a Strong & Light weight ABS Plastic Housing assures Maintenance free
• Performance for many years
• Stroboscope Housing has been carefully Shaped to tit comfortably in either hand

Technical Specifications:

Leverage on our technical expertise, we offer our clients a gamut of Digital Stroboscope Meter of superior quality. This is manufactured under the guidance of our skilled team of technocrats, in compliance with international quality standards. In order to ensure quality and smooth operation at users’ end, this product is stringently tested on different predefined parameters. This product is available in various sizes, designs and models for our esteemed clients.

Features:

• Stroboscope Used Exclusive One Chip Micro Computer LSI circuit
• Crystal Time Base to Offer the High Accuracy Measurement & last Measuring Time
• Wide Measuring Range & High Resolution
• Digital Display Gives Exact reading with no Guessing or errors
• Multi Functional One Stroboscope combines low high Measuring Range
• The use of Durable long lasting components, Including a Strong & Light weight ABS Plastic Housing assures Maintenance free
• Performance for many years
• Stroboscope Housing has been carefully Shaped to tit comfortably in either hand

Technical Specifications:

Specification Part - 2

10 Hz - 99.99 Hz Power Less than 30 Watt.0.1 Hz consumption100 - 208 Hz Dimension 21 x 12 x 12 cm Accuracy ± ( 0.15 % + 0.2 RPM ) rdg. ( 8.3 x 4.8 x 4.8 inch ).< 1,000 RPM Weight 1Kg/2.2 LB.± ( 0.5 % + 1 RPM ) rdg. Housing case Compact and impact plastic1,000 to 3,300 RPM injection case with plastic ± 1 % FS. mirror type reflector. 3,301, to 12,500 RPM Calibration Crystal time base and rdg : reading, FS : full scale microprocessor circuit, not Switch Select RPM, Hz necessary take any external Function Fine adjust, Coarse adjust, calibration procedure if the Multiply by 2, Divide by 2, stroboscope working properly.Fast finder, Memory recall. Accessories Operation manual........1 PC.Memory Can memorize 10 sets of included Power cord................. 1 PC.measuring data. Optional Accessories * RS232 cable.........UPCB-02Set up stability 1 digit within 10 minute. * USB cable............ USB-01.Data output RS 232 computer interface. * Data Acquisition software Operating temp. 0 to 50 (32 to 122 ). ...........................SW-U801-WIN.Operating humidity Less than 80% R.H. Operating duty For prolong life and safe operation, please adhere to the following duty cycle: Cycle < 2000 RPM - 2 hours, 2000 to 3600 RPM - one hour, 3601 to 8000 RPM - 30 minutes, > 8000 RPM - 10 minutes. * 10 min. cooling off period between cycles. FLASH TUBE SPECIFICATIONS Flash tube Xenon lamp. Flash tube It is required to change the Flash Duration Approximately 60 to 1,000 replacement flash tube when the microseconds. instrument start to flash Flash color Xenon white 6,500 K degree irregularly at speeds of 3600Flash energy 4 Watts-seconds (joules). RPM/FPM or more.Beam Angle 80 degrees.OPERATIONS PROCEDURES Preparation (a) Plug unit into a properly grounded 110V AC, 220V AC or 230V AC outlet.(b) Turn the power switch to " on " position.(c) Determine the range switch to " Low " or " High " position.Checking Speed When checking speed, care must be taken to insure that the strobe is flashing in unison (one to one) with the object being monitored. A Stroboscope will also stop motion at 2:1, 3:1, 4:1 et., this is normally referred to as harmonies. To be sure of unison, turn the dial until two images appear - this will double the actual speed. Then lower the flashing rate until a single and stationary image appears - this is the actual true speed.Checking Motion For motion analysis, simply locate the actual speed as mentioned above and then turn the dial slowly up or down. This will give a slow motion effect allowing complete inspection.Remark When order the stroboscope, should inform the power supply type is AC 110V, or220 V or 230V.