Send Email

0804763785085% Response Rate

Home

Profile

What We Offer

Contact Us

Home » What We Offer » Environmental Testing Instruments

Environmental Testing Instruments

Our range of products include digital sound measurement meters bp sl- 1352, sound pressure level bp-nd9, sound level meter bp-sl4010, ultrasonic distance estimator bp-6450, digital photo/contact tachometer model : dt-2236 and digital electronic distance meter - model - bp - ldm -100.

Digital Sound Measurement Meters BP SL- 1352

REQUEST CALLBACK

Ask for Price

Product Price :Get Latest Price

Features:

Max & Min Measurement
Over & Under range Display
Data logger Function (Storage of upto 99 readings)
Analog AC/DC Output for connection to frequency analyzer or X-Y Shaft recorder
‘A’, ‘C’ or ‘Flat’ weighing with Slow/Fast response
94dB in Full Calibration at (1KHz)

Yes! I am interested

Sound Pressure Level BP-ND9

REQUEST CALLBACK

Ask for Price

Product Price :Get Latest Price

Sound pressure level 94 dB and 114 dB
Accuracy ± 0.3 dB (20°C, 760 MM Hg)
Frequency of 1000 ± 0.1% Hz allows calibration with A, B, C, D weighting networks or linear.
Extremely low influence of static pressure.
Conforms to IEC942 class 1
Calibration of 1" and 1/2" microphones
Battery operated
Temperature Range -10 to + 50°C
Storage (with batteries removed) -40 to +65°C
Temperature Coefficient : 0 to 0.01 dB/°C
Altitude Effects : Approx. 0.1dB decrease for each 2000 feet increase in altitude from sea level to 12,000 feet elevation, or comparable atmospheric pressure change (approx. every 50mm of Hg decrease).
Power source : Two 9V batteries (installed)
Item size : approx. 48 x 48 x 138 mm
Item weight : approx. 250g

Yes! I am interested

Sound Level Meter BP-SL4010

REQUEST CALLBACK

Ask for Price

Product Price :Get Latest Price

Our standard sound level meter CENTER 320 has a wide dynamic range from 30 to 130 dB. It has different frequency weighting A and C to respond to human sense or machine monitoring purposes. For different sound pattern, it also supplies Fast and Slow time constant setting. Analog output is also provided for other use.

4 Digits Display
MAX / MIN Function
Level Range Display
Resolution 0.1dB
AC / DC Signal Output
IEC 651 TYPE II

Yes! I am interested

Ultrasonic Distance Estimator BP-6450

REQUEST CALLBACK

Ask for Price

Product Price :Get Latest Price

Specifications:

Calcutates area and volume
Laser to target the point to which you want to measure
Auto converts feets to meters
Back light
Measurement range: 0.6 to 15m (2 to 50 feet)
Accuracy : ±0.5% ± 1digit
Resolutions: 0.01m(1feet)
Aperture angle: approx. ±5 degrees
Laser diode type: Red laser diode 650nm
Power supply : 6F22 (9V ) x 1
Battery life: 10 hours of continous dynamic measurement with alkaline batter y
Dimensions: 136mm x 59mm x 38mm
Weight: Approx. 150g (including batter y)
Calculation range:
Length: 9999m
Area: 99999m²
Volume: 99999m³

Yes! I am interested

Digital Photo/Contact Tachometer Model : DT-2236

REQUEST CALLBACK

Ask for Price

Product Price :Get Latest Price

FEATURES * World's patent, Multi-functions, oneinstrument combine Photo TachometerRPM ) and Contact Tachometer ( RPM,m/min., ft/min. ). * Wide measuring range :0.5 to 100,000 RPM. * < 1,000 RPM, 0.1 RPM resolution . * High precision with 0.05% accuracy. * Memorize the last value, max., value,min. value * High visible LCD display. * Exclusive one chip LSI circuit &crystal time base * The use of durable, long lastingcomponents, including a strong, lightweight ABS plastic housing, assuresalmost maintenance free performancefor many years

FEATURES * World's patent, Multi-functions, one * High visible LCD display gives RPM readinginstrument combine Photo Tach.( RPM ) & exactly with no guessing or errors & savesContact Tach. ( RPM, m/min., ft/min. ). battery energy. * Wide measuring range from 0.5 to 100,000 * This tachometer used the exclusive one chipRPM. MICRO-COMPUTER LSI circuit & crystal * 0.1 RPM resolution for the measured value time base, offer the high accurate< 1000 RPM. measurement & fast sampling time. * High precison with 0.05% accuracy. * The use of durable, long lasting components, * The last value, max., value, min. value will be including a strong, light weight ABS plasticstored into the memory automatically & can be housing, assures almost maintenance freeobtained by pressing MEMORY CALL performance for many years.BUTTON. * The housing cabinet has been carefully shapedto fit comfortable in either hand. SPECIFICATIONSPhoto Tachometer : Operating Less than 80% R.H.5 to 99,999 RPM. HumidityMeasurement Contact Tachometer : Memory Last/Max./Min. value.& Range 0.5 to 19,999 RPM. Battery 4 x 1.5V AA ( UM-3 ) batteries.Surface Speed : Power Photo type :m/min. - 0.05 to 1,999.9 m/minConsumption Approx. DC 153 mA.ft/min. - 0.2 to 6,560 ft/min. Contact type :RPM: Approx. DC 10 mA.0.1 RPM ( < 1,000 RPM ). Size 195 x 61 x 38.5 mm.1 RPM ( 1,000 RPM ). ( 7.6 x 2.4 x 1.5 inch ).Resolution m/min.: Weight 280g ( 0.61 LB )0.01m/min. ( < 100 m/min. ). * including batteries.0.1m/min. ( 100 m/min. ). Carrying case..................1 PC.ft/min.: Reflecting tape marks0.1 ft/min. ( < 1,000 ft/mn. ). Accessories ( 600 mm ).....................1 PC.1 ft/min. ( 1,000 ft/mn. ). Included RPM adapter ( CONE )Display 5 digits, 10 mm ( 0.4" ) LCD. ................................. 1 PC.Accuracy ± ( 0.05% + 1 digit ). RPM adapter ( FUNEL )Time base Quartz crystal. ................................. 1 PC.Circuit Exclusive one-chip of Surface speed test wheelmicrocomputer LSI circuit. ................................. 1 PC.Operating 0 - 50 ( 32 - 122 ). Operation manual........... 1 PC.TemperatureThe DT-2236 had following countries patent & patent pending :Patent USA - 4,823,080 GERMANY - G9015492.4, G8708922.0TAIWAN - 45478 & other countries patent pending.* Appearance and specifications listed in this brochure are subject to change without notice.

Yes! I am interested

Digital Electronic Distance Meter - Model - BP - LDM -100

REQUEST CALLBACK

Ask for Price

Product Price :Get Latest Price

Area,volume calculations

Indirect measurement using Pythagoras

Addition/Subtraction

Continuous measurement

Min/Max distance tracking

Display illumination and multi-line display

Buzzer indication

Multifunctional end pieces

Measuring Range	0.05 to 50m (0.15ft to 164ft)
Measuring accuracy(2σ)	Typically: ±1.5 mm (± 0.06 in)
Smallest unit displayed	1mm
Measuring units	m, in, ft
Measuring units	Class II 635nm, <1mW
Measuring units	IP 54
History measurement records	20
Keyboard Type	Soft-Touch Keypad
Operating Temperature	0°C to 40°C (32°F to 104°F)
Operating Temperature	-10°C to 60°C (14°F to 140°F)
Battery Life	Up to 4,000 measurements
Batteries	Type AAA 2 x 1.5V
Auto. laser switch-off	after 0.5 min
Auto instrument switch-off	after 3 min
Size(HxWxD)	115mm x 48mm x 28mm

Yes! I am interested

Combination Stroboscope Model : BP-2299

REQUEST CALLBACK

Ask for Price

Product Price :Get Latest Price

Features : * Stroboscope use high intensity LED array. * LCD display with back light. * Stroboscope range : 10 to 99,999 RPM. * External trigger for stroboscope. * Photo tach. range : 10 to 99,999 RPM. * Photo tachometer use the laser light beam. * Power supply : 1.5 V ( UM-1 ) x 4 PCs * DCV power supply via external AC/DC adapter is available, AC/DC adapter is optional.

COMBINATION STROBOSCOPE Model : BP-2299FEATURES* Combination Stroboscope with 3 functions : * Battery power Stroboscope, use high intensity LED Digital Stroboscope, Laser Photo Tachometer, array, long life.Contact Tachometer ( optional probe ), 3 in 1 , * Back light high visible LCD display gives exact reading intelligent function. with no guessing or error and saves battery energy.* Stroboscope, wide measuring range up to 99,999 RPM. * High precision both for Stroboscope and Tachometer* The Digital Stroboscope is used the microprocessor measurement.circuit design, high accuracy, digital readout, light duty, * Use an exclusive one chip MICRO-PROCESSOR that is ideal for inspecting and measuring the speed of LSI-circuit and crystal time base to offer high moving gears, fans, centrifuges, pumps, motors and accuracy measurement & fast measuring time.other equipment used in general industrial * Stroboscope build in external trigger input.maintenance, production, quality control, laboratories * Long distance Laser Photo Tachometer build in.and as well as for schools and colleges for * Optional Contact Tachometer probe is available.demonstrating strobe action. * Compact and heavy duty housing case.GENERAL SPECIFICATIONS Display 5 digits ( 0 to 99999 ) LCD display. Operating 0 to 50 ( 32 to 122 ) Circuit Exclusive one-chip design microprocessor Temperature LSI circuit. Humidity Less than 80% R.H. Measurement Stroboscope Power Supply DC 1.5 V, UM-1 (D type) battery x 4 PCs Unit : FPM ( rotation per minute ). * DC 9V adapter input is built, AC/DC build in external trigger input. adapter is opional, not in included.Laser Photo Tachometer Power Stroboscope ( 3600 FPM ) :Unit : RPM ( rotation per minute ). Consumption DC 160 mA.Contact Tachometer Laser photo Tachometer ( 3600 RPM ) :Unit : RPM ( rotation per minute ). DC 130 mA. Surface speed ( ft/min., m/min ) Weight 800 g ( 1.76 LB ).* It should cooperate with optional Dimensions 21

Yes! I am interested

Combination Stroboscope Model : BP-2299

REQUEST CALLBACK

Ask for Price

Product Price :Get Latest Price

Specification Part - 2

mx12 cmx12 cm (8.3"x4.8"x4.8").contact probe ( TA-35 ). Accessories Operation manual.............................1 PC.Sampling Time Approx. 1 second. Included Reflective tape.................................1 PC.Calibration Crystal time base and microprocessor Optional Contact Tachometer probe ( TA-35 ).circuit, no external calibration process Accessories ACV 110V, 220/230V to DC 9V adapter.required.ELECTRICAL SPECIFICATIONS OF STROBOSCOPE Stroboscopic 100 to 99,999 flashes per minute (FPM). Resolution 0.1 FPM/RPM (less than 1,000 FPM/RPM)Flash Rate Low range : 100 to 1,000 RPM/FPM. 1 FPM/RPM ( > 1,000 FPM/RPM ).High range : 1000 to 99,999 RPM/FPM. External Input signal : 5V to 30 V rms,Accuracy ± ( 0.05% + 1 digit ). Trigger 100 to 99,999 RPM/FPM.Light Source Long life high intensity LED array. Input ELECTRICAL SPECIFICATIONS OF LASER PHOTO TACHOMETER Range 10 to 99,999 RPM Accuracy ± ( 0.05% + 1 digit ).Photo 50 - 1,500 mm typically. Sampling Time 1 sec. ( 60 RPM ).Tachometer * Spec. of detecting distance are that Resolution 0.1 RPM < 1,000 RPM detecting under the size of reflecting tape is 10 1 RPM 1,000 RPM distance mm square & the measuring RPM Time base Quartz crystal value is 1,800 PPM. The max. & min. Laser light * Less than 1 mW.detecting distance may change under source * Class 2 laser diode. Red. Wave length different environment, different is 645 nm approximately.reflecting tape or the measuring RPM beyond 1800 PRM. ELECTRICAL SPECIFICATIONS OF CONTACT TACHOMETER ( OPTIONAL PROBE, TA-35 )Range Contact Tachometer : Resolution 0.1 RPM < 1,000 RPM 0.5 to 19,999 RPM 1 RPM 1,000 RPM Surface Speed ( m/min. ) : 0.01 m/min. 100 m/min. 0.05 to 1,999.9 m/min. 0.1 m/min. > 100 m/min.Surface Speed ( ft/min. ) : 0.1 ft/min. < 1000 ft/min.0.2 to 6,560 ft/min. 1 ft/min. 1,000 ft/min. Accuracy ± ( 0.05% + 1 digit ). Accessories RPM adapter ( Cone type )............ 1 PC.Sampling Time 1 sec. ( 6 RPM ). Included RPM adapter ( Funnel type ).......... 1 PC.Surface speed test wheel.............. 1 PC.

Yes! I am interested

Ultrasonic Distance Meter BP-1005

REQUEST CALLBACK

Ask for Price

Product Price :Get Latest Price

Ultrasonic Distance Meter
Specifications:

Power supply: 1 × 9V Alkaline type 6LR61 Battery
Measure units: Foot or Meter
Accuracy: 0.5%
Frequency: 40KHz(ultrasonic pickup)Working
Temperature: 0 Centigrade to 43 Centigrade Range:0.91 to 18.288m
Dimensions(H-P-I): 142 × 73 × 47mm
Weight(without battery): 144.6g

Yes! I am interested

Moisture Meter Model BP - 8040

REQUEST CALLBACK

Ask for Price

Product Price :Get Latest Price

M BP-8041Ultradwikowy miernik gruboci materiauUltrasonic thickness meterpomiar gruboci rónych materiaów: metal, szko, plastik, ceramika itp.thickness measurement of various material: metal, glass, plastics, pottery etc.wywietlacz 4-cyfrowy0.0%~95.7%, -10~+50°Cdisplay: 4 digitszakres pomiaru1.2mm~225mm (stal/steel)measurement rangepomiar rurmin. dia. 20 x 3mm (stal/steel)pipe measurementzakres prdkoci fali dwikowej1000~9999 m/sultrasonic wave velocityrozdzielczo0.1mmresolutiondokadno±(1%H+0.1mm)accuracyczstotliwo ultradwików5MHzultrasonic frequencymoliwo ustawienia prdkoci fali dwikowejultrasonic velocity adjustablejednostki pomiaru mm/calethickness units mm/inchwskazanie niskiego poziomu naadowania bateriilow power indicationautomatyczne wyczenieauto power offzasilanie3xAAA (1.5V)

Yes! I am interested

Digital Stroboscope Model : BP-2239A

REQUEST CALLBACK

Ask for Price

Product Price :Get Latest Price

DIGITAL STROBOSCOPE Model : BP-2239A DESCRIPTION The model DT-2239A is a microprocessor circuit design, high accuracy, digital readout, light duty STROBOSCOPE/TACHOMETER that is ideal for inspecting and measuring the speed of moving gears, fans, centrifuges, pumps, motors and other equipment used in general industrial maintenance,production, quality control, laboratories and as well as for schools and colleges for demonstrating strobe action.SPECIFICATIONS Display 0.3" LED, 4 digits. Power Supply 110 Vac 10%, 50/60 Hz.Stroboscopic 100 to 10,000 flashes per or 220 Vac 10%, 50/60 Hz.Flash Rate minute (FPM). or 230 Vac 10%, 50/60 Hz.Accuracy 100 to 5,000 FPM/RPM) - Power Less than 30 Watt.± 1 digit. Consumption over 5000 FPM/RPM - Operating Temp. 0 to 50 (32 to 122 ). ± 0.05% . Operating Less than 80% R.H. Resolution Less than 10,000 FPM/RPM- Humidity 1 FPM/RPM. Dimension HWD - 21 x 12 x 12 cm Over 10,000 FPM/RPM - (8.3x4.8x4.8 inch).10FPM/RPM Weight 1Kg/2.2 LB.Sampling Time 1 second. Housing Compact and impact plastic Range Select Automation. injection case with plastic Circuit This stroboscope/tachometer mirror type reflector. employs an custom one-chip Calibration Crystal time base andof microcomputer LSI circuit microprocessor circuit, don't& crystal control time base necessary take any external which results in extraordinary calibration process.accuracy over a wide, dynamic Accessories Operation manual......... 1 PC.range. Included FLASH TUBE SPECIFICATIONS Flash tube Xenon lamp. Flash tube It is required to change theFlash Duration Approximately 60 to 1,000 replacement flash tube when the microseconds. instrument start to flash Flash color Xenon white 6,500 K degree. irregularly at speeds of 3600Flash energy 4 Watts-seconds (joules). RPM/FPM or more.Beam Angle 80 Operating duty For prolong life and safe operation, please adhere to the following duty cycle: Cycle Below 1,000 RPM - 30 Minutes. Above 3,600 RPM - 5 Minutes.Always allow a 10 minute cooling off period between cycles. OPERATIONS PROCEDURES Preparation (a) Plug unit into a properly grounded 110V AC, 220V AC or 230V AC outlet.(b) Turn the power switch to "on" position.(c) Determine the range switch to "Low" or "High" position.Checking Speed When checking speed, care must be taken to insure that the strobe is flashing in unison (one to one) with the object being monitored. A Stroboscope will also stop motion at 2:1, 3:1, 4:1 et., this is normally referred to as harmonies. To be sure of unison, turn the dial until two images appear - this will double the actual speed. Then lower the flashing rate until a single and stationary image appears -this is the actual true speed.Checking Motion For motion analysis, simply locate the actual speed as mentioned above and then turn the dial slowly up or down. This will give a slow motion effect allowing complete inspection.Remark : When order the stroboscope, should inform the power supply type is AC 110 V, 220 V or 230 V.* Appearance and specifications listed in this brochure are subject to change without notice.

Yes! I am interested

Distance Meter Thermometer

REQUEST CALLBACK

Ask for Price

Product Price :Get Latest Price

Anemometer, Clamp meter, Data Logger, Digital multimeter, Digital oscilloscope, Digital thermometer, Gas detector, Gas analyzer, Humidity meter, Infrared thermometer, Light meter, Manometer, Multifunction Process Calibrator, Panel meter, Power Quality Analyzer, Pressure Calibrator, RTD, RTD Calibrator, Soldering Accessories, ScopeMeter, Sound meter, Tachometer, Temperature controller, Thermocouple, Thermocouple Calibrator, etc.

Yes! I am interested

Digital Stroboscope

REQUEST CALLBACK

Ask for Price

Product Price :Get Latest Price

Digital Stroboscope Model : BP-2269

FEATURES * Push keyboard setting. * External trigger input. * RS232 computer interface output. * Flash rate :5 to 10,500 RPM/FPM.0.083 to 175 Hz * Display 14 mm LED, 6 digits. * High resolution. * Main function : Fine adjust, Coarse adjust, Multiply by 2, Divide by 2, Fast finder, Memory recall. * Memorize 10 sets of measuring data. * Crystal time base and microprocessor circuit, not necessary take any calibration procedures. * Power supply :AC 110V/220V/230V, 50/60 Hz. * Application for inspecting and measuring the speed of moving gears,fans, centrifuges, pumps, motors, general industrial maintenance,production, quality control,laboratories, schools and colleges...

DIGITAL STROBOSCOPE Model : BP-2269 FEATURES * DT-2269 is a microprocessor circuit design, high accuracy, digital readout STROBOSCOPE. Adjusting the "Flash Rate" by push button keyboard, unique design in the world, easy operating & with intelligent function. That is ideal for inspecting and measuring the speed of moving gears, fans, centrifuges,pumps, motors and other equipment used in general industrial maintenance, production, quality control, laboratories and as well as for schools and colleges for demonstrating strobe action. * External trigger input. * RS232 computer interface output.SPECIFICATIONS Display 14 mm ( 0.56" ) LED, 6 digits. External trigger Input signal : 5V to 30 V rms,Set up unit Flash rate - RPM/FPM, Hz 5 to 10,500 RPM.* FPM - flash per minute. 0.083 to 175 Hz.Flash rate RPM 5 to 12,500 RPM. Power supply AC 110V 10%, 50/60 Hz.set up range Hz 0.083 to 175 Hz. or AC 220V 10%, 50/60 Hz.RPM/ 0.1 RPM or AC 230V 10%, 50/60 Hz.Resolution FPM 5 to 999.9 RPM Circuit This stroboscope/tachometer ( internal trigger ) 1 RPM employs an custom one-chip1,000 to 9,999 RPM of microcomputer LSI circuit10 RPM & crystal control time base10,000 to 12,500 RPM which results in extraordinary Hz 0.001 Hz accuracy & high set up< 10 Hz stability over a wide, dynamic0.01 Hz range

Yes! I am interested

Digital Type Lux Meter/ Data Logger BP - 203

REQUEST CALLBACK

Ask for Price

Product Price :Get Latest Price

Digital Type Lux Meter/ Data Logger is designed with auto range and auto power off facility and maximum hold, minimum hold and average hold function. The Lux Meter/ Data Logger can stores up to 7000 values and provided with one silicon photodiode sensor with filter. The Lux Meter/ Data Logger is available in two models such as KM 203 and KM 8051. Digital Type Lux Meter/ Data Logger can operate for a specific temperature of 0 degree C to 50 degree C.
Kusam-Meco is the manufacturer of Digital Type Lux Meter/ Data Logger. Kusam-Meco also supplies wide range of digital test and measuring instruments that include multimeters and clamp meters to cater to varied range of requirements of government laboratories, research laboratories, engineering colleges and different segments of the industry. Kusam-Meco is an ISO 9001:2008 awarded company.
Digital Type Lux Meter/ Data Logger has the following features:

Spectral response close to CIE luminous spectral efficiency.

Cosine Angular corrected

According to JIS C 1609:1993 & CNS 5119 general A class specifications

Measuring lights source include all visible light

Measuring intensities of illumination in Lux or foot-candles

Data hold and zero adjustment facility

Large integrated circuit design

Auto range and Auto power off

Data Logger stores up to 7000 values

Maximum hold, minimum hold and average hold

Sensor: One silicon photodiode with filter

Yes! I am interested

Photo/contact Tachometer Model : BP-2230

REQUEST CALLBACK

Ask for Price

Product Price :Get Latest Price

FEATURES * Mini pocket size, easy carryout.* Photo tachometer :5 to 100,000 RPM Contact tachometer :0.5 to 19,999 RPM.Surface speed :m/min, ft/min.* Laser beam for Photo tachometer, long measuring distance.* LCD display, RS-232 interface.* Patented.
Pocket type, computer interface PHOTO/CONTACT TACHOMETER Model : BP-2230FEATURES* Compact and pocket tachometer. Display LCD, size 32 mm x 28 mm.* The best Tachometer in the world. 2 in 1, one 5 digits with display unit.instrument combine Photo tachometer and Contact Accuracy ± ( 0.1% + 1 digit ). @ reading Tachometer. Photo 5 to 150 cm typically.* Photo tachometer uses Laser light detecting source, Tachometer * Spec. of detecting distance are that long measuring range up to 1.5 meters, it is useful in detecting under the size of reflecting tape is the RPM measurement application where the machine distance 10 mm square & the measuring RPM would be a risk to the operator or close access is value is 1,800 RPM. The max. & min.difficult or not possible. detecting distance may change* Wide measuring range from 0.5 to 100,000 RPM, 0.1 under different environment,RPM resolution for the measured value < 1000 RPM. different reflecting tape or the* Microprocessor based circuit, crystal time base, high measuring RPM beyond 1800 RPM.precision with 0.1% accuracy. Time base Quartz crystal.* High visible LCD display gives RPM reading exactly Circuit Exclusive one-chip of microcomputer with no guessing or errors & saves battery energy. LSI circuit.* Memory with recall function, the last value, max., Photo Tach. * Less than 1 mW.value, min. value will be stored into the memory Laser light * Class 2 laser diode.automatically. source Red Wave length is 645 nm * The use of durable, long lasting components, including approximately.a strong, light weight ABS plastic housing, assures Operating 0 to 50 ( 32 to 122 ). almost maintenance free performance for many years. Temperature* RS232 PC serial interface. Operating Less than 80% R.H.* Patent patented. Humidity Memory Memorize Last/Max./Min. value.SPECIFICATIONS Data Output RS232 PC serial interface.Measurement Photo Tachometer : Battery 4 x 1.5V AAA ( UM4 ) batteries.& Range 5 to 99,999 RPM. Power Photo tachometer :Contact Tachometer : Consumption Approx. DC 29 mA.0.5 to 19,999 RPM. Contact tachometer :Surface Speed : Approx. DC 5 mA.m/min. - 0.05 to 1,999.9 m/min. Size 156x50x33 mm. ( 6.1x2.0x1.3 inch ).ft/min. - 0.2 to 6,560 ft/min. Weight 187 g ( 0.41 LB ).Resolution RPM : Accessories Reflecting tape marks0.1 RPM ( < 1,000 RPM ). Included ( 600 mm )........................... 1 PC.1 RPM ( 1,000 RPM ). Operation manual..................1 PC.m/min.: Spare RPM cone rubber..........1 PC.0.01 m/min. ( < 100 m/min. ). Spare RPM funnel rubber........1 PC.0.1 m/min. ( 100 m/min. ). Optional * Carrying case, CA-52A ft/min.: Accessory * RS232 cable, UPCB-02.0.1 ft/min. ( < 1,000 ft/mn. ). * Data Acquisition software,1 ft/min. ( 1,000 ft/mn. ). SW-U801-WIN.* Appearance and specifications listed in this brochure are subject to change without notice.

Yes! I am interested

Distance Meter Smart Sensor Ultrasonic Range Finder BP-851

REQUEST CALLBACK

Ask for Price

Product Price :Get Latest Price

Smart Sensor Ultrasonic Range Finder

Specifications:

Measuring Range :Single Unit:0.3~20m; Double Unit:1.0~60m
Accuracy:±1%
Measure In Imperial/Metric
Resolution:1cm
Laser Class: 2 class
Laser Power & Wavelength:P=1mW ; =635nm
Auto Power off
Low Battery Indication
Backlight
Continuing Measurement
Measuring Benchmark Setup
Length Summation
Area/ Volume Measurement Function
Data Store: 5 group
Power:9V DC battery
Product Net Weight: 315g
Product Size: 150*75*46mm
Packing:Gift box

Yes! I am interested

Lux Meter BP-108

REQUEST CALLBACK

Ask for Price

Product Price :Get Latest Price

Sensor used the exclusive photo diode & two layers color correction filter, spectrum meet C.I.E. photo pic.

Sensor COS correction factor meet standard.

0.1 Lux resolution for the 200 Lux range.

Separate LIGHT SENSOR allows user to measure the light at an optimum position.

High accuracy in measuring.

LSI circuit provides high reliability and durability.

LCD display allows clear readout-out even at high ambient light level.

Compact, light weight and excellent operation.

Built-in low battery indicator.

Yes! I am interested

Digital Lux Meter Model BP-lux-99

REQUEST CALLBACK

Ask for Price

Product Price :Get Latest Price

Digital Lux Meter

We have a wide spectrum of Digital Lux Meters that are developed using exceptional quality raw material, which gives perfect design and shape to these meters. In addition to this, we offer our products at competitive prices to meet the bulk requirements of the global clients. Moreover, we provide customization for our range to fulfill the vast application requirements of the customers.

FEATURES

* Precise & easy readout.

* High accuracy in measuring

* LSI - circuit use provides high reliability & durability.

* Permits a wide range of light measurements.

* Low Battery Indication.

* Compact, light-weight, & excellent operation.

* LCD display can clearly read out even in High Ambient Light

* Separate LIGHT SENSOR allows user take measurements at an optimum position.

Yes! I am interested

Lux Meter BP-103

REQUEST CALLBACK

Ask for Price

Product Price :Get Latest Price

Sensor used the exclusive photo diode & color correction filter, spectrum meet C.I.E. photo pic.
Sensor cosine correction factor meet standard.
Both Lux & Foot-candle measurement, wide range.
Separate LIGHT SENSOR allows user to measure the light at an optimum position.
High accuracy in measuring.
LSI circuit provides high reliability and durability.
LCD display allows clear readout-out even at high ambient light level.
Pocket size , easy to carry out & operation.
Compact, light weight and excellent operation.
Built-in low battery indicator.

Yes! I am interested

Digital Lux Meter BP-101

REQUEST CALLBACK

Ask for Price

Product Price :Get Latest Price

Sensor used the exclusive photo diode & multi – colour correction filters, spectrum meet C. I. E. standard.
Sensor COS correction factor meet standard.
Separate LIGHT SENSOR allows user take measurements of an optimum position.
Precise and easy readout, wide range.
High accuracy in measuring
Built-in low battery indicator.
LSI-circuit use provides high reliability and durability.
LCD display provides low power consumption.
Compact, light-weight, and excellent operation.
LCD display can clearly read out even of high ambient light.

Yes! I am interested

Lux Meter BP-107

REQUEST CALLBACK

Ask for Price

Product Price :Get Latest Price

Features:

Light sensor used the exclusive photo diode & color correction filter, spectrum meet C.I.E. standard.
Sensor cosine correction factor meet standard.
Wide range measurement both for Lux & Foot Candle units.
Four lighting type selection, Tungsten, Fluorescent, Sodium or Mercury light source.
Zero adjustment by push button.
Microprocessor circuit.
Large LCD display.
Heavy duty & compact case.
Records Maximum, Minimum and Average readings.
Data hold.
Auto power off saves battery life.
Separate Light Sensor allows user to measure the light at an optimum position.

Yes! I am interested

Digital Lux Meter BP-101/A

REQUEST CALLBACK

Ask for Price

Product Price :Get Latest Price

Sensor used the exclusive photo diode & multi – colour correction filters, spectrum meet C. I. E. standard.
Built-in low battery indicator.
LSI-circuit use provides high reliability and durability.
Sensor COS correction factor meet standard.
Separate LIGHT SENSOR allows user take measurements of an optimum position.
LCD display provides low power consumption.
Compact, light-weight, and excellent operation.
Precise and easy readout, wide range.
LCD display can clearly read out even of high ambient light.
High accuracy in measuring.

Yes! I am interested

Lux Meter BP-105

REQUEST CALLBACK

Ask for Price

Product Price :Get Latest Price

LIGHT METER 4 Light type

ISO-9001, CE, IEC1010

Selection of lighting type (Tungsten, Fluorescent, Daylight or Mercury).

Super large LCD display with contrast adjustment for best viewing angle.

Sensor used the exclusive photo diode & color correction filter, spectrum meet C.I.E. photonic.

Dual function meter's display.

Heavy duty & compact housing case.

Records Maximum, Minimum and Average readings with RECALL.

Sensor cosine correction factor meet standard.

Microprocessor circuit assures maximum possible accuracy, provides special functions and features.

Relative % light measurement.

Zero adjustment by push button.

Data hold.

Wide measurement both of Lux & Foot Candle measurement.

Auto shut off saves battery life.

RS 232 PC serial interface.

Yes! I am interested

Sound Level Meter BP-4005

REQUEST CALLBACK

Ask for Price

Product Price :Get Latest Price

Conforms to international Standard. Multi Functional Sound Level Meter can measure Sound Level (Lp) Equivalent continuous 'A' Sound Level (Leq) Maximum Sound Level (Lmax) percentage of all reading over alarm value set (LN). 'A' 'C' or flat weighing and Slow /Fast response time built in calibration, Alarm set and output & APO Function Compatible to RSf 232 interface PC Connectivity.

Yes! I am interested

Looking for Environmental Testing Instruments ?